Clay Spade For Paving Breakers & Clay Diggers

Clay Spades Are Manufactured For Use By Tunneling Or Sewer Contactors And Is A Lightweight Tool Designed To Eliminate Operator Fatigue While Increasing The Cubic Yards Of Clay Removed Each Day. The Blade Section Is Thin And Curved For Faster Cutting And Easier Removal. A Heavier Blade Is Furnished On Tools Used In Larger Hammers Where The Prime Usages Are Trenching, Trimming, And General Excavation. The 8" Wide Blade Is Made Only In The Heavier Style.

• 4-1/2", 5-1/2", & 8" Wide Spade (Shovel) Blade
• Heat Treated Forged Steel
• 6" Long Chisel Blade For Deep Digging
• 11" Long Under Collar For Upright Operation & Less Fatigue

   

  Do Not Use On Concrete Or As A Crowbar Since Breakage May Occur And Cause Serious Injury As Well As Void Warranty

  Measure Top Of Shank From Flat To Flat To Determine 7/8", 1", 1-1/8" Or 1-1/4" Diameter, And Measure From Top Of Shank To Collar To Determine 3-1/4", 4-1/4" Or 6" Length Of Chuck Liner In Paving Breaker Or Clay Digger.

  As A Rule Most Clay Diggers Are 7/8" x 3-1/4" Or 1" x 4-1/4" Chuck Sizes, Whereas 60 Lb. Paving Breakers Are 1-1/8" x 6" & 90 Lb. Paving Breakers Are 1-1/4" x 6" Chuck Sizes Respectively But This Can Vary On Manufacturer Of Equipment And Customer Preferences. Please Check Paving Breaker Chuck Liner Before Ordering As The Wrong Shank Can Cause Severe Damage If Operated In Wrong Size Chuck.

  Brunner & Lay Is Shown Above But We Offer Other Manufacturers If You Prefer To Substitute Ajax, Bicknell, Champion, Tamco, Atlas Copco, Chicago Pneumatic, Or Sullair You Need Only Request It And It Will Be Shipped At No Additional Cost. Depending On Availability Any Of the Manufacturers Listed Will Be Shipped.