CLEMCO Model 1.0 Cu. Ft. Portable Blaster With TLR50 Remote Control System, MSV Grit Valve, Blast Hose & Nozzle

Requirements for Operation: (These items are required but not all are included with this equipment)

• Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
• Minimum 12 cfm at 50 psi needed to close the pop-up valve and pressurize the blast machine.
• OSHA-required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized. (Included)
• NIOSH-approved, type CE, supplied-air respirator.
• Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
• Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
• Appropriate blast suit, work boots, hearing and eye protection.

Description of Operation:

The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.

Advantages

• One-man portable industrial-quality blast machines manufactured to ASME code.
• Industrial-quality valves, piping and fittings designed to maximize air flow and minimize energy required to operate the system.
• MSV abrasive metering valve maintains smooth, consistent, adjustable media flow.

Features Include:

• Full Flow Stainless Steel Teflon-Sealed Ball Valves With Brass Body
• Semi-Elliptical Head For Larger Storage Of Abrasive
• Urethane-Coated Pop-Up Valve With External Sleeve For Long Wear Life & Fast Pressurization
• Large Inspection Door For Easy Access To Inside
• Heavy-Gauge Construction Pressure Vessel Fabricated For Rugged Field Service
• Built To ASME Standards
• Conical 35 Degree Bottom Ensures Total Use Of Abrasive & Uninterrupted Abrasive Flow
• 45 Degree Abrasive Flow Into Air Stream
• Heavy Duty Piping Assembled Tightly Against Tank Avoids Unnecessary Protrusions
• Flexible Pusher Line Guarantees Air Flow Without Pressure Loss
• Mounted On Two Heavy-Duty Rubber Wheels For Easy Portability
• 25' x 1/2" ID Blast Hose With Coupling x Nozzle Holder Installed
• UT Series (3/4" Thread) #3 3/16" Tungsten Carbide Nozzle

Approvals and Certifications:

Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified.

Remote control system complies with OSHA regulation 1910.244 (b).

Select Here For Additional Information & Parts Breakdown:

Freight Charges Are Additional and Will Not Appear At Check Out.  Call For Freight Quote.

If Your Company Has A Freightline Preference and An Account Please List It Under Notes At Check Out.