|
|
CLEMCO Model 4.0 Cu. Ft. 2004 AA Contractor Style Portable Blast Machine With LP Ambient Air Pump OSHA Package
|
|
Item Number: 21841/CAP1
* Whole number only
|
The CLEMCO Model 4.0 Cu. Ft. 2004 AA Contractor Style Portable Blast Machine With LP Ambient Air Pump OSHA Package is a high-performance blast cleaning system that removes corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings. See related literature for additional applications. Machine holds 4 cubic feet of abrasive for up to 30 minutes of continuous blasting at 100 psi with standard No. 5 nozzle (5/16-inch orifice). This Unit Does Include Ambient Air Pump For LP Respirator.
Requirements for Operation: (These items are required but are not all included with this package)
- Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
- Maximum working pressure 150 psi
- Minimum pressure 30 psi needed to operate OSHA-required remote control valves
- NIOSH-approved, type CE, supplied-air respirator. (Included)
- Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com). Included
- Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application. (Sand Is Not An Approved Media)
- Appropriate blast suit, work boots, hearing and eye protection.
Description of Operation:
The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.
Advantages:
- Two-wheel integral cart for ease of moving.
- Rated for 150-psi maximum working pressure.
- 1-1/2-inch Millennium valve provides unrestricted air flow.
- Quantum metering valve maintains smooth, consistent flow, adjustment knob allows precise control of media flow.
- 29-inch width fits through standard doorways.
- Two-wheel integral cart for ease of moving.
- Robust handles act as skid for loading machine into pickup or trailer and protect valves and piping from damage.
- Central hookup point for blast hose and remote controls.
- Weather-resistant storage area holds manuals, paperwork and small parts.
- High-efficiency air filter/moisture separator helps keep abrasive dry
- Weather-resistant storage area holds manuals, paperwork and small parts
- State-of-the-art NIOSH-approved respirator with DLX comfort-fit suspension
- CAP-1 Ambient Air Pump
Approvals and Certifications:
Clemco's quality management system is ISO 9001-2008 certified.Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified.
Apollo 600 helmet is NIOSH-approved type-CE air fed respirator and is recognized by OSHA as having an assigned protection factor (APF) against lead dust of 1000 times the permissible exposure limit (PEL).Remote control system complies with OSHA regulation 1910.244 (b)
Items Included In 21481/CAP-1 Clemco 4.0 Cu. Ft. Contractor Package:
* 4 cu ft contractor blast machine ..................................21505
* 1-1/2" Millennium valve ................................................21336
* Quantum abrasive metering valve..............................22845
* 50 ft x 1" Supa blast hose, coupled with CQPS-1 nylon coupling & NHP-1 nylon nozzle holder ..............................23480
* TMP-5 contractor thread nozzle ...................................23521
* Blast hose safety cable ................................................15013
* 1-1/2" Air filter/moisture separator w/manual drain...22363
* 20" recessed blast machine screen ............................03099
* Apollo 600 LP DLX helmet ............................................25195
* CAP-1 Ambient Air Pump..............................................25908
* 50 ft x 1/2" respirator hose ...........................................22510
* Leather gloves ...............................................................02243
* Helmet outer lenses, pkg. of 25 ...................................04361
* Helmet intermediate lenses, pkg. of 5.........................24943
* Nylon ties, (8 provided) .................................................02195
* 50 ft twinline hose...........................................................01951
* RLX pneumatic handle ..................................................10565
* Abrasive trap ..................................................................02011
* Replacement flexible pusher line ...............................23674
* All-weather machine cover (polyethelene bag) ........15143
* Quick coupling gaskets, pkg. of 10...............................21584
* Nozzle washers, pkg. of 10 ...........................................91024
* Abrasive trap screens 6 ea. ..........................................02012
Dimensions:
* Height (Floor to Highest Point): 49"
* Width (Outside Hub To Hub): 29"
* Length (Hose Cplg. to Handle): 47-3/4"
* Machine Diameter: 20"
* Net Weight: 494 Lbs.
* Shipping Weight: 566 Lbs.
Select Here For Additional Information & Parts Breakdown:
Select Here For Additional Information For CAP-1 Ambient Air Pump:
For Your Own Health Silica Sand Is Not Recommended And For Legal Reasons Voids The Warranty, Though Sand Will Flow Easily Through These Machines.
Freight Charges Are Additional and Will Not Appear At Check Out. Call For Freight Quote.
If Your Company Has A Freightline Preference and An Account Please List It Under Notes At Check Out
|
Clemco Blast Machine Screens & Covers
| | |
|
|