Clemco Model 25072 CMS-2 Portable Carbon Monoxide Monitor Only (12V DC)

Clemco CMS-2 Portable Carbon Monoxide Monitor Only (12V DC) Ensures The Quality Of Air Supply To Your Respirator Is Made Simple. The Clemco CMS-2 Carbon Monoxide (CO) Monitor Is A Field Portable Carbon Monoxide Monitor And Alarm For Respirator Air Supply. If CO Exceeds 10 PPM, It Triggers A Warning Light, And A High-Decibel Audible Alarm. The Rugged Case With Comfortable Carrying Handle, Protects The Monitor From Minor Impacts. Used By Blasting And Painting Contractors For Field Operations.

The Clemco CMS-2 Portable Carbon Monoxide Monitor Only (12V DC) Will Detect Carbon Monoxide Levels Less Yhan 1 Part Per Million (PPM) And Alerts You With A 105-Decibel Audible Alarm And Visual Indicator When It Exceeds The Allowable Level. The CMS-2 Is Equipped With An Easy-View LCD Screen That Displays The Amount Of CO Present In The Air. The Unit Can Be Powered With 12-Volt DC, 120-Volt AC, Or 220-Volt AC. If You Are Working Far From The Unit, Up To 250 Feet, Utilize The Optional Remote Strobe And Alarm.

The Clemco CMS-2 Carbon Monoxide Monitor Features Include:

• Rugged Carrying Case
• Remote Strobe And Buzzer Capabilities Allow For Audio/Visual Alarm Close To Work Area
• Calibration Controls Are On One Panel For Easy Maintenance
• Multiple Power Sources: 12-Volt DC, 120-Volt AC, Or 220-Volt AC 50/60 hz 
  
• Heavy-Duty Air Inlet Fitting
  
• Remote Strobe And Alarm Available
  
• Easy To Calibrate
  
• Water And Corrosive Resistant Case
  
• Visible LCD Display
  
• Audio And Visual Alarm
  
• Shielded To Reject Radio Frequency Interference
• Includes 10 Feet Of 1/8-Inch Tubing & Connector Fittings
• Electrochemical Sensor Responds Instantly To CO
• CMS-2 Has Polyethylene Case With Dual Hinges, Dual Latches, & Dust- Tight, Weather-Resistant Rubber Seal
• Nominal Noise Rating Of 98 dB At Distance Of One Foot For The Standard Alarm
  
• Meets OSHA CO Monitoring Requirements For Blasting & Painting Contractors
• Dimensions:  Height: 9-1/4"  x Width: 10 3/8" x Depth: 5"
  
• Weight: 9 Lbs.

120-Volt & 220-Volt AC Monitors Can Be Field Converted To 12-Volt DC. (Refer to Section 2.3 Of Operations Manual Above)
 
Additional Information

Select Here For Additional Information


For Your Own Health Silica Sand Is Not Recommended And For Legal Reasons Voids The Warranty, Though Sand Will Flow Easily Through This Machine. Breathing Dust From Silica Sand May Cause Silicosis, A Fatal Lung Disease. Breathing Dust During Blasting Operations May Also Cause Asbestosis And/Or Serious Other Diseases. A NIOSH Approved And Well-Maintained Air Supplied Abrasive Blasting Respirator Must Be Used By Anyone Blasting, Anyone Handling Or Using The Sand And Anyone In The Area Of The Dust. Harmful Dust Can Remain Suspended In The Air For Long Periods Of Time After Blasting Has Ceased, Causing Serious Injury Or Death

Any damages or shortages MUST be noted on the carrier receipt at the time of delivery. Notify the carrier and Construction Equipment & Supply Co. immediately and we will assist you as fully as we can. Please retain a signed copy of the bill of lading or delivery receipt for your records.