CLEMCO Model 28632 Low Pressure Base Unit All-In-One Wet Blast Injector System (50mm)

<< Previous in Clemco Wet Blast Injector System

Next in Clemco Wet Blast Injector System >>

Price: $31,040.00

CLEMCO Model 28632 Low Pressure Wet Blast Injector System

Item Number: 28632

Manufacturer: Clemco

Manufacturer Part No: 28632

Quantity:

Email this page to a friend

The CLEMCO Model 28632 Low Pressure (5 - 125 PSI) Base Unit All-In-One Wet Blast Injector System Includes 6 Cubic Foot Blast Machine, 120-Gallon Water Storage Tank, & Pump Module Mounted On A Portable Framed Platform. Engineered To Provide High Proformance Blasting With Maximum Dust Suppression. Contractors Have Depended Upon Clemco Industries Blast Machines For Getting Jobs Done Quickly & Easily For Many Decades. The CLEMCO Model 28633 Low Pressure All-In-One Wet Blast Injector System Incorporates Proven Technology, Combined In A New Way, Providing The Same Quality & Productivity-Enhancing Features For Day-In-Day Out Service.

The CLEMCO Model 28632 Low Pressure (5 - 125 PSI) Base Unit All-In-One Wet Blast Injector System Gives You Convenience You Don’t Get From Traditional Slurry Systems. Its Design & Simplified Set Up & Operation Make For Easier End-Of-Shift Shutdown. By Mixing The Abrasive & Water After It Leaves The Blast Machine, You Never Have To Empty A Machine Of A Messy Water/Abrasive Mix.

The CLEMCO Model 28632 Low Pressure (5 - 125 PSI) All-In-One Wet Blast Injector System Is Simple To Operate. Fill The Blast Machine With Dry Abrasive, Fill The Water Tank, Add Rust Inhibitor If Desired, Or Simply Connect To A Municipal Water Supply. Connect Compressed Air, Adjust The Metering Valve, Blast Pressure, & Water Pressure. A Single Air Connection Supports All Pneumatic Equipment.

Flexible Set Up Options Allow You To Position The Water Injector Either At The Base Of The Blast Machine Or At The Nozzle – Your Choice. With The Injector At The Nozzle, You Can Adjust The Water/Abrasive Mix At Any Time.

You Can Dry-Blast With The CLEMCO Model 28632 Low Pressure (5 - 125 PSI) Base Unit All-In-One Wet Blast Injector System, Simply Remove The Injector Adaptor Mounted At The Base Of The Machine, & Turn Off Air To The Pump.

Choose Among Eight Systems From Basic To Complete Packages In Low Pressure (5 - 120 PSI) & Normal Pressure (50-120 PSI) Ranges. Purchase A Base Unit When You Already Own Coupled Blast Hoses, Nozzles, & Operator Safety Equipment. Choose The Base Unit To Suit The Threading Of The Nozzle You Intend To Use. Purchase A Complete Blast System Package Which Includes A Base Unit, 50' Of Coupled Supa-Blast Hose, A 7/16" Orifice Long Venturi Nozzle, & Operator Safety Equipment Of Apollo 600HP DLX Air Fed Respiratory Helmet, Clem-Cool Air Conditioner, & CPF-20 Breathing Air Filter.

Clemco Model 28632 Low Pressure Wetblast Base Unit Includes:

* Model 2448 6-Cubic Foot Blast Machine with Pneumatic Remotes, 1-1/4" Pipe String, & ASME National Board Approved Vessel
* Metering Valve: AQV AutoQuantum
* Remote Controls: Pneumatic Type With Millennium Inlet Valve, TLR Outlet Valve, RLX Control Handle, 52' Twinline Hose, 52' ACS Hose & ACS Switch
* Model 28632 Equipped With 50mm Threaded Pipe Injector & Nozzle Injector Assemblies
* Model 28632 Is Set @ 5 - 120 PSI (Ideal For Lumber, Pallets, Furniture, Antiques, Automobiles & Other Soft Material)
* 120 Gallon Water Tank
* Wetblast Injector Pump Module
* Base-Mount Wetblast Injector
* Standard Wetblast Injector With 50' Water Hose
* Abrasive Cut off Switch - With Injector & ACS At The Nozzle, You Can Control Wash Down & Surface Blow Off Without A Trip To The Blast Machine
* 24" Blast Machine Screen & Cover
* 1 ½" Pressure Regulator & Air Filter
* Skid Mounted With Fork Lift Pockets & Lifting Eyes (Caster Wheels Available As Option)
* Dimensions: Length: 68" x Wide: 46" x Height: 52"
* Shipping Weight: 1500 Lbs.

Description:	Stock Numbers:	Stock Numbers:
FLEX Base Units With Choice of Nozzle Injector Assembly	Nozzle Thread 1¼” Fine 1” Entry	Nozzle Thread Contractor 50mm 1¼” Entry
FLEX 2448 Base Unit Pressure Range 50 to 120 PSI	28436	28434
LP FLEX 2448 Base Unit Pressure Range 5 to 120 PSI	28633	28632
Shipping Weight:	1500 lbs	1500 lbs
Shipping Dimensions:	68” Long x 46” Wide x 52” High

For Your Own Health Silica Sand Is Not Recommended And For Legal Reasons Voids The Warranty, Though Sand Will Flow Easily Through Machine

**Truck Freight Shipment Requirements

Delivery location must be accessible to the delivery truck. Liftgate or Pallet Jack must be arranged at time of order. Unloading and moving product(s) is your responsibility. Truck freight companies do NOT require their drivers to unload shipments. Inspect all packages upon delivery. Any damages or shortages MUST be noted on the bill of lading at the time of delivery. Notify the carrier and Construction Equipment & Supply Co. immediately and we will assist you as fully as we can. Please retain a signed copy of the bill of lading for your records.

Due To Weight Restrictions This Unit Must Ship By Common Carrier. This Is An Additional Charge To Sales Price Above. Please Call For Freight Quote Or Supply Preferred Carrier & Account Number In "Messages" On Order Form.

This item cannot be shipped by UPS. It will ship by common carrier directly from the factory in Washington, Mo. For a quote on shipping cost to your location, call (303) 431-9929) or email coeqs@hotmail.com with the Zip Code to which you would like it shipped. Please specify if the delivery location is commercial or residential. Trucking companies charge more to deliver to residential locations. If other options such as “Liftgate” or “Call To Schedule Delivery” is required these may also be an additional charge.

Price Above Does Not Include Packaging For Domestic & International Shipments Exporting Requires Crating At An Additional Charge.