|
|
Silicon Carbide #5 (5/16") Long Venturi Nozzle
|
|
* denotes required field
Pick Size*
You must select an option for 'Pick Size'.
* Whole number only
|
Silcon Carbide Long Venturi Design Nozzle With Lightweight Acetal/Urethane Jacket And Threads Weighs Less Than 18 Ounces And It Packs A Lot Of Punch. A Polyurethane Jacket And Threads Absorbs The Impact, Protecting The Lightweight Silicon Liner, And Making It Feel As If You Have A Feather At The End Of Your Hose.
Silcon Carbide Long Venturi Design Nozzle With Lightweight Acetal/Urethane Jacket And Threads Features:
- Bore Diameter: 5/16" (8 MM)
- Long Venturi Design
- Lightweight Acetal Jacket And Threads
- Thread Size: 1-1/4" - 11-1/2 NPSM Or 50 MM 2" - 4-1/2 U.N.C. Contractor Thread
- Inlet Size: 1" Std. Entry On 1-1/4" Thread Or 1-1/4" Wide Entry On 50 MM Thread
- Length: 5-3/4" (145 MM)
- Minimum Air Requirements: 137 CFM @ 100 PSI
- Normal Media Consumption Per Hour Of 800 Lbs.
- Cross Reference: A-Bec: ASPL-5 209-1929 (1-1/4"), ASMP-5 209-2174 (50MM); Clemco: SSR-5 04704 (1-1/4"), SMR-5 04540 (50MM), Empire: NA; Kelco: NA; Sanstorm: NAWe Carry Several Manufacturers Of Sandblast Nozzles. The Most Popular And Economical Without Sacrificing Quality Are Listed Above.
Wide Entry (1-1/4") Nozzles Begin At #5 (5/16") Size.
Additional Information
Silicon Vs Tungsten Vs Boron Carbide Liner
|
|
|
Aluminum Nozzle Holder With
3/4" NPS & 1-1/4" NPS Threads
|
Brass Nozzle Holders With
3/4" NPS & 1-1/4" NPS Threads
|
Nylon Nozzle Holder
With 1-1/4" NPS Threads
| | |
|
|