Silicon Carbide #6 (3/8") Long Venturi Design Acetal Jacket Nozzle

Silcon Carbide Long Venturi Design Nozzle With Lightweight Acetal/Urethane Jacket And Threads Weighs Less Than 18 Ounces And It Packs A Lot Of Punch. A Polyurethane Jacket And Threads Absorbs The Impact, Protecting The Lightweight Silicon Liner, And Making It Feel As If You Have A Feather At The End Of Your Hose.

• Bore Diameter: 3/8" (9.5 MM)
• Long Venturi Design
• Lightweight Acetal Jacket And Threads
• Thread Size: 1-1/4" - 11-1/2 NPSM Or 50 MM 2" - 4-1/2 U.N.C. Contractor Thread
• Inlet Size: 1" Standard Entry Except Everblast SY-8/50 Has 1-1/4" Inlet Size
• Length: 6-3/4" (173.5 MM)
• Minimum Air Requirements: 196 CFM @ 100 PSI
• Normal Media Consumption Per Hour Of 1150 Lbs.
• Cross Reference: A-Bec: ASPL-6 209-1930 (1-1/4"), ASMP-6 209-2175 (50MM); Clemco: SSR-6 04705 (1-1/4"), SMR-6 04541 (50MM), Empire: NA; Kelco: NA; Sanstorm: NA

   

  We Carry Several Manufacturers Of Sandblast Nozzles.

  The Most Popular And Economical Without Sacrificing Quality Are Listed Above.

  Siaion Is A Registered Trademark of Boride/Kennemetal

  ClemLite Is a Registered Trademark of Clemco Industries

  Additional Information

  Silicon Vs Tungsten Vs Boron Carbide Liner