|
|
Tungsten Carbide #12 (3/4") Long Venturi Nozzle
|
|
Product Options
| Manufacture & Size Below: |
|
* Whole number only
|
Tungsten Carbide Long Venturi Design Nozzle With Lightweight Acetal/Urethane Jacket And Threads Weighs Less Than Metal & Brass Nozzles And It Packs A Lot Of Punch. A Polyurethane Jacket And Threads Absorbs The Impact, Protecting The Tungsten Carbide Liner, And Making It Feel As If You Have A Feather At The End Of Your Hose.
These Nozzles Are Also Available With Aluminum Jacket & Threads As Well As Acetal Jacket & Brass Threads. One Combination Should Meet Any Customers Needs.
Tungsten Carbide Long Venturi Design Nozzle Features:
- Bore Diameter: 5/8" (15.9 MM)
- Long Venturi Design
- Lightweight Acetal Or Aluminum Jacket
- Acetal/Urethane, Brass Or Aluminum Threads
- Thread Size: 1-1/4" - 11-1/2 NPSM Or 50 MM 2" - 4-1/2 U.N.C. Contractor Thread
- Length: 9-1/2" (241.3 MM)
- Minimum Air Requirements: 800 CFM @ 100 PSI (22.66 Cu. M/Min)
- Horsepower Requirements: 175 HP (130.50 kW)
- Normal Media Consumption Per Hour Of 4700 Lbs. (2132 Kg.)
- Inlet Size: 1-1/4" Wide Entry
Cross Reference: A-Bec: ATPL-12 (1-1/4"), NA (50MM); Empire: NA; Kelco: NA; Sanstorm: NA
We Carry Several Manufacturers Of Sandblast Nozzles.
The Most Popular And Economical Without Sacrificing Quality Are Listed Above.
|
Aluminum Nozzle Holder With
3/4" NPS & 1-1/4" NPS Threads
|
Brass Nozzle Holders With
3/4" NPS & 1-1/4" NPS Threads
|
Nylon Nozzle Holder
With 1-1/4" NPS Threads
|
|
|