|
|
Tungsten Carbide #7 (7/16") Long Venturi Design Acetal Nozzle
|
|
Product Options
| Manufacture & Size Below: |
|
* Whole number only
|
Tungsten Carbide Long Venturi Design Nozzle With Lightweight Acetal/Urethane Jacket And Threads Weighs Less Than Metal & Brass Nozzles And It Packs A Lot Of Punch. A Polyurethane Jacket And Threads Absorbs The Impact, Protecting The Tungsten Carbide Liner, And Making It Feel As If You Have A Feather At The End Of Your Hose.
Tungsten Carbide Long Venturi Design Nozzle With Lightweight Acetal/Urethane Jacket And Threads Features:
- Bore Diameter: 7/16" (11.1 MM)
- Long Venturi Design
- Lightweight Acetal Jacket And Threads
- Thread Size: 1-1/4" - 11-1/2 NPSM Or 50 MM 2" - 4-1/2 U.N.C. Contractor Thread
- Length: 8-1/4" (209 MM)
- Minimum Air Requirements: 255 CFM @ 100 PSI (7.22 Cu. M/Min)
- Horsepower Requirements: 60 HP (44.74 kW)
- Normal Media Consumption Per Hour Of 1550 Lbs. (703 Kg.)
- Inlet Size: 1" Std. Entry**
Cross Reference: A-Bec: ATPL-7 (1-1/4"), NA (50MM); Empire: NA; Kelco: NA; Sanstorm: NA
**Only The Everblast 754004/UDLW-7AC50 Above Is 1-1/4" Wide Entry.
All Other Nozzles Are 1" Standard Entry.
We Carry Several Manufacturers Of Sandblast Nozzles.
The Most Popular And Economical Without Sacrificing Quality Are Listed Above.
|
Aluminum Nozzle Holder With
3/4" NPS & 1-1/4" NPS Threads
|
Brass Nozzle Holders With
3/4" NPS & 1-1/4" NPS Threads
|
Nylon Nozzle Holder
With 1-1/4" NPS Threads
|
|
|