PIRATE SMALL PIPE BLASTER, 9/32" W/REDUCER & COLLAR SET FOR 1" TO 2" ID PIPE

<< Previous in 14. Pipe Blasting

Next in 14. Pipe Blasting >>

PIRATE SMALL PIPE BLASTER, 9/32" W/REDUCER & COLLAR SET FOR 1" TO 2" ID PIPE

Manufacturer: Pirate

Freight Quote Will Be Forwarded Upon Checkout

Product Options

Size Below::

Quantity:

Email this page to a friend

Small Tubing And Pipe May Be Cleaned By Using The PIRATE SMALL PIPE BLASTER,. Inner Diameters From 3/4" To 2" Falls Within The Scope Of This Tool. The Basic Design And Operation Is Similar To Larger Tool Except That All Of The Parts Are Smaller. Tungsten Carbide Lined Reducer Attaches To Blast Hose Threaded Coupling And Accepts A 3/8" Pipe Lance To Convey Air/Abrasive Mixture To The PIRATE SMALL PIPE BLASTER.

Four Sets Of Centering Collars Are Furnished With The Unit To Permit Adjustments To Various Sizes Within 1" To 2" Range. Tool By Itself Will Slide Into 3/4" I.D. Pipe.

Designed For Manual Travel Through Pipe. Before Blasting, Tool Is Pushed Through Pipe To The Opposite End. When The Air Is Turned On, The Operator Pulls The Tool Through Pipe At A Speed Necessary To Achieve Desired Degree Of Cleaning

Abrasive Is Accelerated And Propelled Through Specially Designed Nozzles. End Result Is High Velocity With Hard Impact On Surface That Will Remove The Most Stubborn Materials

PIRATE SMALL PIPE BLASTER Features Include:

3/4" - 2" I.D. Pipe
Tungsten Carbide Deflection Tip
Requires 80 CFM Of Air
Maximum Abrasive Size Is 30 Mesh
Aluminum Oxide & Silicon Carbide Are NOT Recommended And Will Void Warranties
Deflector Tip Gives 360 Degree Cleaning With No Need To Rotate Pipe
Removes Rust, Paint & Other Contaminants
Four Sets Of Centering Collars Are Furnished With This Unit To Permit Adjustment
To Various Sizes Within The 1" To 2" Range
Tool By Itself Will Fit Into 13/16" ID Pipe
Designed For Manual Travel Through Pipe
Weight: 3 Lbs.

Pipe Lance Extension Is Available At Extra Charge. Please Call For Pricing Depending On Lengths.

RATED AT 80 CFM @ 100 PSI

BLASTS 13/16" ID PIPE WITHOUT COLLARS

Any damages or shortages MUST be noted on the carrier receipt at the time of delivery. Notify the carrier and Construction Equipment & Supply Co. immediately and we will assist you as fully as we can. Please retain a signed copy of the bill of lading or delivery receipt for your records.

CLEMCO HOLLO-BLAST JR.

PIRATE SMALL PIPE BLASTER, 9/32" W/REDUCER & COLLAR SET FOR 1" TO 2" ID PIPE

Product Options